Product Description
ABS Pump Master Cylinder Booster Assembly for Mitsubishi Pajero 3.2 MN116391
Feature:
Common faults include:
The abs warning light & buzzer activates
The brake pedal goes hard
Pump motor failure
Hydraulic brake booster pump motor open malfunction, fault code C1251
Hydraulic brake booster pump on time abnormal long, fault code C1252
Accumulator low pressure malfunction, fault code C1256
Accumulator pressure system malfunction, fault code 57 (Mitsubishi)
Solution:
We can offer a cost effect and time saving alternative to purchasing a complete remanufactured unit. We can repair the customers own unit for the above listed faults. This also guarantees that no programming is required upon refitting of the unit. Every remanufactured unit is returned to customer with detailed bleeding instructions to follow upon reinstallation.
Specifications:
Condition: Remanufactured
Manufacturer Part Number: MN116391, MR977461，MR569728
Fitment:
For Toyota Landcruiser 100 series
For Toyota Landcruiser Prado 120 / 150 series
For Lexus LX 100 series
For Lexus GS / SC series
For Mitsubishi Pajero NM-NW series
Package included:
1 x ABS Pump
Note:
1.Please make sure the part you purchased fit your car before the purchasing. If you can not make sure, please send me message of your VIN , we will help you check.
2.Professional installation is recommended.
Before installing the ABS pump, the tire air must be drained as follows:
1. Install the six oil pipes of the ABS pump and do not install the plugs
2. Do not start the car and apply the brakes three or four times
3. Unscrew the air pump screw on the brake disc, first drain the gas from the left front wheel, and then drain the gas from the right front wheel
4. After exhausting the air, plug in the ABS pump plug
5. Apply the brake three times in a row, hear the sound of the motor turning, and then open the rear wheel exhaust valve. Evacuate the left and right wheels three times each
