Product Description
FREE fast shipping for USA. International delivery may take longer.
Magneto Generator Engine Stator Coil Fit For Polaris 4012939 4012548 4012113
FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsars coil included.
Connector included.
All products shipped are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Dimensions :
Interior diameter : 53.9mm / 2.12 inches
Exterior diameter : 118.7mm / 4.67 inches
Pole's Thickness : 34.4mm / 1.35 inches
Pole's Width : 15mm / 0.59 inches
Other specifications :
Number of wires: 11
Number of pins: 13
Number of plugs: 4
Number of fixation holes: 5(+3)
Number of poles: 18
PART NUMBER(S):
4012939
4012548
4012113
FITMENT:
Fits Polaris 600 HO IQ EFI L/C 2009
Fits Polaris 600 IQ Shift 136 EFI L/C 2009
Fits Polaris 600 IQ Widetrak EFI L/C 2010-2015
Fits Polaris 600 Pro RMK 2012
Fits Polaris 600 RMK 144 EFI 2009/2012
Fits Polaris 600 RMK 155 EFI L/C 2012
Fits Polaris 600 Rush 2010-2012
Fits Polaris 600 Rush LX EFI L/C 2011
Fits Polaris 600 Rush Pro-R EFI L/C 2011-2012
Fits Polaris 600 Switchback Adventure 2012
Fits Polaris 600 Switchback EFI L/C 2012
Fits Polaris 600 Switchback Pro 2012
Fits Polaris 800 Pro RMK 2012
Fits Polaris 800 RMK EFI L/C 2011-2012
Fits Polaris 800 Rush 2012
Fits Polaris 800 Rush Pro-R 2011-2012
Fits Polaris 800 Switchback Adventure 2012
Fits Polaris 800 Switchback Assault 2011-2012
Fits Polaris 800 Switchback EFI L/C 2012
Fits Polaris 800 Switchback Pro-R 2012
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitment)
PACKAGE INCLUDED:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
