__51763.1547099434.jpg?c=2 "Stator Coil For Scrambler 900 06-16 865 06-07 865 EFI 08-10")
__51763.1547099434.jpg?c=2 "Stator Coil For Scrambler 900 06-16 865 06-07 865 EFI 08-10")
Product Description
FREE fast shipping for USA. International delivery may take longer.
Magneto Generator Engine Stator Coil For Triumph Bonneville T100 Speedmaster/America 800 900 America/Scrambler/Thruxton/Speedmaster 865 EFI 2002-2017
FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Replacement Part Number: T1305502,T1300076
Dimensions :
Interior diameter : 54mm / 2.11"
Exterior diameter : 115mm / 4.52"
Thickness : 14mm / 0.54"
Other specifications :
Number of wires: 3
Number of pins: 3
Number of plugs: 1
Number of fixation holes: 3
FITMENT:
For Triumph Bonneville T100 2002-2017
For Triumph Thruxton 900 2004-2016
For Triumph Speedmaster 900 2006-2016
For Triumph America 800 2002-2006
For Triumph America 900 2007-2016
For Triumph Scrambler 900 2006-2016
For Triumph Bonneville 900 2008-2017
For Triumph Speedmaster 800 2003-2005
For Triumph America 865 2007
For Triumph America 865 EFI 2008-2010
For Triumph Bonneville 800 2001-2006
For Triumph Scrambler 865 2006-2007
For Triumph Scrambler 865 EFI 2008-2010
For Triumph Speedmaster 865 2005-2007
For Triumph Speedmaster 865 EFI 2008-2010
For Triumph Thruxton 865 2004-2007
For Triumph Thruxton 865 EFI 2008-2011
PACKAGE INCLUDED:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
