Product Description
MustFun Hitbox Mini Stickless Controller Suitable For PC/PS3/PS4/Switch And Other Gaming Devices
Descriptions:
Name: MustFun Hitbox stickless controller with display, mini custom gaming keyboard
Applicable to: PC/Android/Switch/PS3/PS4/Steam/Acrade and other gaming devices
Working voltage: 5V
Link mode: USB Type-C
Product size: 197mm * 98mm * 11mm
Supported platforms: pc/ps3/ps4/switch/Android
Features:
• Dual-core ARM Cortex-M0+ processor, main frequency 133MHz
• Up to 16MB of external flash memory can be connected through dedicated QSPI bus support
• Fully connected AHB cross switch
• Integrated 264kB on-chip SRAM, divided into six independent groups
• Manufactured using 40nm process, with low dynamic power consumption and low leakage current
• 1ms delay, frame-free leakage rate exceeds 95%
• 1.3-inch OLED display
• Full key RGB backlight, side decorative backlight, player indicator light
• With 3 TYPE-C input ports and a push-type self-locking main switch
• Supports Web configurator configuration parameters, please visit http://192.168.7.1
• Supports firmware updates, more features and compatibility are coming soon, please visit https://gitee.com/xiangnan_qjp/must-fun-hitbox.git
Specifications:
Gray Wood Axis V4
• Axis material: POM material
• Spring: 2-stage spring
• Initial pressure: 30gf min
• Total stroke: 3.6±0.3mm
• Conductive stroke: 1.5±0.3mm
• Conductive pressure: 40±3gf
• Bottom-out pressure: 50±3gf
Bright Moon Axis
• Axis type: linear axis
• Initial pressure: 32±5gf
• Total stroke: 3.4±0.2mm
• Conductive stroke: 2.0±0.3mm
• On-state pressure: 37±5gf
• Bottom-out pressure: 42±5gf
Note:
EXT.PORT is used for extended functions (PS4/PS5 authorization), please do not connect your game console through this port.
Package Included:
1x Keyboard Controller
1x Type-C Data Cable
1x Shaft Puller
2x Additional Keycaps
1x Ash Wood Shaft
10x Foot Pads
1x Manual
