Product Description
MNSPD600 Solar Surge Protector Device Replacement for Midnite Solar MNSPD-600Feature:
1.MNSPD-600-DC Surge Protector For all DC circuits up to 600 volts .The DC SPD will work well on all DC circuits up to 600 volts as well . The difference between the AC and DC SPD is the way the LED's are powered. The protection side of things is identical.
2.Grounding System:A good grounding system is essential for both safety and lightning protection.The NEC recommends a grounding resistance of 25 ohms or less. The lightning protection industry recommends a grounding resistance of 10 ohms or less. A thorough evaluation of the grounding system is strongly recommended. 1) This product contains no serviceable parts. 2) Use a power cord suitable for 90°C. The wire used to connect the SPD to the line or bus should not be longer than necessary and should be free of unnecessary bends.
3.Perfect for:Off-grid and grid-tie solar systems/Residential and commercial solar installations/DIY solar enthusiasts and professional installers Device to ensure long-lasting performance and protection for your solar power system. Don't let unexpected surges compromise your sustainable energy solution – choose YiYou for peace of mind and reliable surge protection.
Package Include:
1× MNSPD600 Solar Surge Protector Device
NOTE:
Before installation or maintenance, check to ensure that the system voltage does not exceed the SPD voltage requirements and that the correct SPD voltage/type has been selected.This unit must be installed in accordance with the National Electrical Code (ANSI/NFPA-70) and applicable local codes.Ungrounded power systems are inherently unstable and, under certain fault conditions, may produce excessive line-to-ground voltages. Under these fault conditions, any electrical device,including SPDs,may be subjected to voltages exceeding its design ratings.