Product Description
FREE fast shipping for USA. International delivery may take longer.
Magneto Generator Engine Stator Rotor Coil Fit For Ducati Diavel / Monster 1200 2014-2019
Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Dimensions :
Interior diameter : 41.9mm / 1.64 inches
Exterior diameter : 107mm / 4.21 inches
Pole's Thickness : 34.8mm / 1.37 inches
Pole's Width : 12.8mm / 0.50 inches
Other Specifications :
Number of wires: 3
Number of pins: 3
Number of plugs: 1
Number of fixation holes: 5)
Number of poles: 18
PART NUMBER(S):
26420461A
26420511A
26420501B
Fitments:
Fit for Ducati 26420461A
Fit for Ducati Diavel 2014-2017
Fit for Ducati Diavel Carbon 2014-2017
Fit for Ducati Diavel 1200 FL 2018
Fit for Ducati Diavel 1200 Diesel 2018
Fit for Ducati Diavel Carbon 1200 FL 2018
Fit for Ducati 26420511A
Fit for Ducati Hypermotard 939 2016
Fit for Ducati 26420501B
Fit for Ducati Hypermotard 939 2017-2018
Fit for Ducati Hypermotard 939 SP 2016-2018
Fit for Ducati Hypermotard 950 SP 2019
Fit for Ducati Hypermotard 950 2019-2020
Fit for Ducati Diavel 1260 2019
Fit for Ducati XDiavel 2016-2019
Fit for Ducati XDiavel S 2016-2019
Fit for Ducati Monster 821 Dark 2020
Fit for Ducati Monster 821 2018-2020
Fit for Ducati Monster 821 Stealth 2019-2020
Fit for Ducati Monster 1200 2018-2019
Fit for Ducati Monster 1200S 2018-2019
Fit for Ducati Monster 1200 25¡ã Anniversario 2019
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
