Product Description
FREE fast shipping for USA. International delivery may take longer.
Magneto Generator Engine Stator Rotor Coil Fit For Can-Am Outlander L 570/Outlander L Max 570 2016-2020Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Dimensions :
Interior diameter : 41.9mm / 1.64 inches
Exterior diameter : 104mm / 4.09 inches
Pole's Thickness : 32.8mm / 1.29 inches
Pole's Width : 13.1mm / 0.51 inches
Other Specifications :
Number of wires: 3
Number of pins: 3
Number of plugs: 1
Number of fixation holes: 3
Number of poles: 18
PART NUMBER:
420685921
Fitments:
Fit for Can-am Outlander T 450 2020
Fit for Can-am Outlander T 570 2020
Fit for Can-am Outlander T MAX 450 2020
Fit for Can-am Outlander T MAX 570 2020
Fit for Can-am Outlander T 6x6 450 2020
Fit for Can-am Outlander T MAX 6x6 450 2018-2020
Fit for Can-am Outlander 6x6 450 2018-2020
Fit for Can-am Outlander 450 2018-2020
Fit for Can-am Outlander 570 2018-2020
Fit for Can-am Outlander T3 450 2018-2019
Fit for Can-am Outlander T3 570 2018-2019
Fit for Can-am Outlander MAX T3 570 2018
Fit for Can-am Outlander MAX 450 2018/2020
Fit for Can-am Outlander MAX 570 2018/2020
Fit for Can-am Outlander L 450 2015
Fit for Can-am Outlander L MAX 450 2015-2017
Fit for Can-am Outlander L MAX 500 2015
Fit for Can-am Outlander L MAX 570 2016-2017
Fit for Can-am Renegade 570 2018
Fit for Can-am Traxter HD5 2017/2019-2020
Fit for Can-am Defender HD5 2017/2019-2020
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
