Product Description
Magneto Generator Engine Stator Fit For Polaris Outlaw 450 525 IRS MXR 2007-2011
FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Dimensions :
Interior diameter : 35mm / 1.38 inches
Exterior diameter : 88.6mm / 3.49 inches
Pole's Thickness : 26.3mm / 1.03 inches
Pole's Width : 9.5mm / 0.37 inches
Other specifications :
Number of wires: 3
Number of pins: 3
Number of plugs: 1
Number of fixation holes: 3
Number of poles: 18
PART NUMBER(S):
4011866
FITMENT:
Fits for Polaris Outlaw 450 "S" 2008/2010
Fits for Polaris Outlaw 450 MXR 2009
Fits for Polaris Outlaw 525 2007
Fits for Polaris Outlaw 525 "S" 2008-2010
Fits for Polaris Outlaw 525 2X4 IRS 2010
Fits for Polaris Outlaw 525 IRS 2008
Fits for Polaris Outlaw 525 IRS 2009
Fits for Polaris Outlaw 525 IRS 2011
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitment)
PACKAGE INCLUDED:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
