Product Description
18-Pole Magneto Generator Stator Fit for Suzuki GN GS TU 125 GN125 NF41A GS125 TU125Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Pick up pulsar coil included - 30mm mount hole spacing.
Connector included.
Rubber grommet included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator Coil
other specifications:
Number of wires: 5
Number of plugs: 1x 2-Pin Male Plug, 1x 3-Pin Female Plug
Number of pins: 2 + 3
Number of fixation holes: 3
Number of poles: 18
Please compare the number of pins and plugs with the old part before purchasing.
Size:
Inner diameter: 35mm
Outer diameter: 95mm
Mount hole spacing center to center: 38mm
Replacement Part Number:
32101-05300
EL021007
(Use the part number to verify fitment to your application. )
Fits Make/Model/Year:
Fit for Suzuki GN 125 (NF41A) 1994-1999
Fit for Suzuki GN 125 U (NF41A) 1994-1999
Fit for Suzuki TU 125 XT (AZ) 1999
Fit for Suzuki TU 125 XTU (AZ) 1999
For all 125cc 4-stroke Chinese motorcycle that use the K157FMI Suzuki based engine stator - with Pick up Pulse - 5 Wire - 18 Coil QM125 GY-2B.
Please check your original parts before ordering to ensure they match the details supplied as some versions of these engines may be different.
Fit for Pulse Adrenaline 125 2008-2016
Fit for Sinnis Apache 125 SM 2008-2019
Fit for Sinnis Apache 125 SMR 2017-2021
Fit for Sinnis Apache 125 SM 2018-2021
Fit for Sinnis Stealth 125 2008-2019
Fit for Sinnis Vista 125 2008-2019
Fit for Sinnis Scrambler 125 2017-2020
Fit for Sinnis Trackstar 125 2010-2019
Fit for SFM ZZ 125 2011-2017
Fit for SFM ZZ 125 Supermoto 2017-2019
Fit for SFM ZX 125 2011-2016
Fit for SFM ZX 125 Enduro 2017-2019
Fit for Lexmoto Street 125 2008-2013
Fit for Lexmoto Adrenaline 125 2015-2019
Fit for Keeway Strike 125
Fit for Superbyke RMR 125 2009-2013
Fit for Superbyke RSR 125 2008-2010
Fit for Qingqi QM125-2D 125 DD 2008-2017
Fit for Kreidler Enduro 125 DD
Fit for Kreidler Supermoto 125 DD
Fit for Kreidler Street 125DD
Fit for Luxxon Supermoto 125
Fit for Luxxon Enduro 125
Please check and see if your stator pole's number as same as our and your connectors and harness looks like the one in the photo before purchasing.
Only for K157FMI series stator - 95mm diameter - 5 wire -1x 2-Pin T-Shape Male Plug and 1x 3-Pin T-Shape Female Plug
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x 18-Pole Stator Generator
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it.
ALWAYS START WITH A FULLY CHARGED BATTERY !
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.
