Product Description
11-Pole Magneto Generator Stator Fit for SYM Joyride HD 125 150 200 EVOFeatures:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Pick up pulsar coil included.
Connector included.
Rubber grommet included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator Coil
other specifications:
Number of wires: 6
Number of plugs: 1x 3-Pin Female Plug, 1x 2-Pin Male Plug, 1x 2-Pin Male Plug
Number of pins: 3 + 2 + 2 + 1
Number of fixation holes: 3
Number of poles: 11
Please compare the number of pins and plugs with the old part before purchasing.
Replacement Part Number:
31120-H9A-000
31120-H9A-001
(Use the part number to verify fitment to your application. )
Fits Make/Model/Year:
Fit for SYM (Sanyang Motor) Joyride 125 2001-2015
Fit for SYM (Sanyang Motor) Joyride 125 E2 2004
Fit for SYM (Sanyang Motor) Joyride EU2 125 2003, 2004
Fit for SYM (Sanyang Motor) Joyride 125 EVO L6 2016
Fit for SYM (Sanyang Motor) Joyride EU2 200 2003-2004
Fit for SYM (Sanyang Motor) Joyride 200 E2 2004
Fit for SYM (Sanyang Motor) Joyride 200 2002-2003/2006
Fit for SYM (Sanyang Motor) HD 125 2009-2010
Fit for SYM (Sanyang Motor) HD 2 125 2014
Fit for SYM (Sanyang Motor) HD 2 125 2015
Fit for SYM (Sanyang Motor) HD 125 EVO 2007-2010
Fit for SYM (Sanyang Motor) HD 2 125i 2014
Fit for SYM (Sanyang Motor) HD EU2 125 2003-2004
Fit for SYM (Sanyang Motor) HD EU2 200 2003-2004
Fit for SYM (Sanyang Motor) HD 125 DRUM BRAKE 2009
Fit for SYM (Sanyang Motor) HD 200 2006-2011
Please check and see if your stator pole's number as same as our and your connectors and harness looks like the one in the photo before purchasing.
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x 11-Pole Stator Generator
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it.
ALWAYS START WITH A FULLY CHARGED BATTERY !
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.
