Product Description
18-Pole Magneto Generator Stator High Output Fit for Suzuki DR-Z 400 DRZ 400S DR-Z400 SM 2000-2024Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Pick up pulsar coil included.
Connector included.
Rubber grommet included.
All products shipped are tested.
NOT as same as the stock stator, manufactured to handle higher power loads.
High output than stock, works with all other OEM components.
Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator Coil
other specifications:
Number of wires: 7
Number of plugs: 1x 3-Pin Male Plug, 1x 4-Pin Male Plug
Number of pins: 3 + 4
Number of fixation holes: 3
Number of poles: 18
Please compare the number of pins and plugs with the old part before purchasing.
Size:
Inner diameter: 35mm
Outer diameter: 93mm
Mount hole spacing center to center: 40mm
Replacement Part Number:
32101-29F00
32101-29F10
32101-13E00
32101-13E02
32101-13E03
21003-S007
(Use the part number to verify fitment to your application. )
Fits Make/Model/Year:
Fit for Suzuki DR-Z400 2000-2004
Fit for Suzuki DR-Z400E 2000-2007
Fit for Suzuki DR-Z400S 2000-2024
Fit for Suzuki DR-Z400SM 2005-2024
Fit for Suzuki DR250R 1998-2000
Fit for Suzuki DRZ250 2001-2007
Fit for Suzuki DR250 250XC 1994-2007
Fit for Suzuki Djebel 250 1998-2008
Fit for Kawasaki KLX400 KLX400R 2003-2004
Fit for Kawasaki KLX400 KLX400SR 2003-2004
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x 18-Pole Stator Generator
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it.
ALWAYS START WITH A FULLY CHARGED BATTERY !
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.
