Product Description
FREE fast shipping for USA. International delivery may take longer.
Magneto Generator Engine Stator Coil Fit For Husqvarna TE TC SMR TXC 250 450 510 05-10 8000A4265
FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.
SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Dimensions :
Interior diameter : 28.9mm / 1.13 inches
Exterior diameter : 83.7mm / 3.29 inches
Pole's Thickness : 28.2mm / 1.11 inches
Pole's Width : 21.1mm / 0.83 inches
Other specifications :
Number of wires: 6
Number of pins: 6
Number of plugs: 2
Number of fixation holes: 2
Number of poles: 8
REPLACEMENT PART NUMBER:
8000A4245
8000A4257
8000A4265
8000A4266
FITMENT:
Fit for Fit for Husqvarna SM400R JAP 2005
Fit for Fit for Husqvarna SM400R 2005-2007
Fit for Fit for Husqvarna SM450R 2005-2007
Fit for Fit for Husqvarna SM510R 2005-2007
Fit for Fit for Husqvarna SMR450 2008-2010
Fit for Fit for Husqvarna SMR510 2008-2010
Fit for Fit for Husqvarna TC250 2005-2008
Fit for Fit for Husqvarna TE250 2005-2009
Fit for Fit for Husqvarna TE310 2009-2010
Fit for Fit for Husqvarna TE450 2005-2010
Fit for Fit for Husqvarna TE510 2005-2010
Fit for Fit for Husqvarna TXC250 2008-2009
Fit for Fit for Husqvarna TXC450 2008-2010
Fit for Fit for Husqvarna TXC510 2008-2010
PACKAGE INCLUDED:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
